"- Umožňuje připojení SATA zařízení (jako jsou například pevné disky, optické mechaniky) na IDE rozhraní


IOI ref.: IDE-SATA07
- pro všechny SATA HDD
- bulk
- Chip:Marvell 88SA8052


IDE-SATA07 is a Parallel ATA to Serial ATA Host mode Bridge Board featuring Marvell 88SA8052 Serial ATA bridge Controller.

IDE-SATA07 is ideally suited for tailgate interface applications for converting Serial ATA device into ATA device. Both ATA and ATAPI modes are supported using the same firmware.
Technical Specifications

Parallel ATA to Serial ATA Bridge Board:

* Serial ATA:
o Compliant with Serial ATA 1.0
o 48-bit sector addressing
* Serial ATA Connector:
o Signal + Power (7+15 pin) Female Type Connector
* Parallel ATA:
o Ultra ATA/133 Parallel Interface
o 48-bit sector addressing
o Jumper for selecting Master and Slave
* Parallel ATA Connector:
o Male IDC 2X20 pin Connector
* Transfer Rate:
o Supports PIO and DMA modes
o Supports bus master DMA at 1.5Gbps burst rate
* DC Power Connector:
o IDE Big 4-pin power connector
* LEDs
o Power LED
o SATA PHY Ready LED
o Activity LED (Pin Header 2pin Pitch=2.54mm)
"

 "* Host Bus: 1-lane 2.5 Gb/s PCI Express
* Eight (8) isochronous transmit/receive contexts
* Deep 8 Kbyte isochronous transmit/receive FIFO’s
* Complies with 1394 OHCI draft 1.2
* Three external 1394 ports
* Bilingual ports with Screw Holes for Jackscrew Type Plug Cable

The FWB-PCIE1X21B combines an OHCI (Open Host Controller Interface) and a high-performance, standards-compliant PCI Express 1.1 host system interface to provide S800 1394b-2002 compliant throughput in a small PCB (Printed Circuit Board) and low power dissipation.

MultipleVCs (Virtual Channels) on the PCI Express link provide native support for QoS (Quality of Service) transmission for real-time and multimedia applications in a standards-based framework, ensuring compatibility with current and future operating systems.
Active-state power management allows dynamic power management during periods of reduced network activity.

Technical Specification
PCI Express:
* Designed for compliance with PCI Express.
* Multiple virtual channel (VC0,VC1 ) support fordiffe-rentiating 1394 isochronous traffic.
* Supports eight user-programmable traffic classes.
* 64-bit and 32-bit platform support.
* Interrupts via legacy INTx interface or message sig-naled interrupt (MSI).
* Supports PCI Express clock power management viaCLKREQN signal for form factors that support thisprotocol.
* Supports all linkpowermanagement states (L0,L0s,L1,andL2/L3) and active state power management(ASPM).
* Supports wake-up from a low-power state via in-bandbeacon signaling and side-band WAKE_N signal.

OHCI (Open Host Controller Interface)
* Enhanced with the OHCI 1.2 draft specification for 1394b-2002 PHY full operational compliance.
* OHCI 1.0 backwards compatible. Configurable via EEPROM to operate in either OHCI 1.0 or OHCI 1.1 mode.
* 8 Kbyte isochronous transmit FIFO.
* 4 Kbyte asynchronous transmit FIFO.
* 8 Kbyte isochronous receive FIFO.
* 8 Kbyte asynchronous receive FIFO.
* Dedicated asynchronous and isochronous descriptor-based DMA engines.
* Eight isochronous transmit contexts.
* Eight isochronous receive contexts.
* Supports parallel processing of incoming physical read and write requests.
* Supports up to 48-bit addressing per OHCI specifica-tion for the physical DMA transfers.

1394b-2002 Link
* Cycle master and isochronous resource manager capable.
* Supports 1394a-2000 and 1394b-2002 acceleration features.

1394b-2002 PHY
* Provides three IEEER 1394b-2002 compliant ports sup-porting 1394b-2002 speeds of 800 Mbits/s and 400Mbits/s while maintaining backward compatibility to IEEE 1394a-2000 speeds of 100 Mbits/s, 200Mbits/s, and 400 Mbits/s over 4.5 m copper.
* Fully supports provisions of IEEE 1394a-2000 and 1394-1995 standards for high-performance serial bus.
* Link is not required for hub operation.
* Supports extended BIAS_HANDSHAKE time for enhanced interoperability with camcorders.
* Does not require external filter capacitor for PLL.
* Supports arbitrated short bus reset to improve utiliza-tion of the bus.
* Supports ack-accelerated arbitration and fly-by concat-enation.
* Supports PHY pinging and remote PHY access pack-ets.
* Fully supports suspend/resume.

Reports cable power fail interrupt when voltage at CPS ball falls below 7.5 V.

Number of Ports:
* Three Bilingual P1394b Cable Ports with Screw Holes for Jackscrew Type Plug Cable

Bus Power Connector:
* Big IDE 4-pin DC Power Connector

Operating System Requirements
* Windows 2000/XP and Windows Server 2003
* Mac OS 10.4.8 or later
* Linux 2.6.X

Výrobek je dodáván s manuálem pouze v anglickém nebo německém jazyce.

"

 "The Delock PCI card powered by IOI expands your PC by three external FireWire 400 Ports. You can connect FireWire devices like external enclosure, digital camera, camcorder, etc. to the card.

Specification
• IOI item number: IOI-4343T
• 3x external FireWire IEEE 1394a ports
• 1x mini 4pin DC +12 V power connector
• IEEE 1394a to PCI controller: Texas Instruments TSB43AB23
• Data transfer rate up to 400 Mb/s
• 32-bit PCI standard 2.2

System requirements
• Windows 98SE/ME/2000/XP/Vista/7, Mac OS 8.6 or above, Linux 2.4.x
• PC with one free PCI Slot

Package content
• PCI card

Package
• Box"

 "Specifikace
- PCI Express Host Adapter na 3 porty OHCI 1.1 kompatibilní IEEE-1394B
- PCI Express x1
- 2+1 FireWire-B porty (2 x externí, 1 x interní)
- čipová sada: Agere/LSI FW643
- rychlost přenosu dat: 800Mbps
- Bus power konektor: IDE 4-pin DC napájecí konektor
- pro Windows 2000/XP, Server2003, MacOS 10.4.8 nebo vyšší, Linux 2.6
- Standard- a LowProfile záslepka slotu součástí dodávky

OHCI (Open Host Controller Interface)
Enhanced with the OHCI 1.2 draft specification for 1394b-2002 PHY full operational compliance.
OHCI 1.0 backwards compatible. Configurable via EEPROM to operate in either OHCI 1.0 or OHCI 1.1 mode.
8 Kbyte isochronous transmit FIFO.
4 Kbyte asynchronous transmit FIFO.
8 Kbyte isochronous receive FIFO.
8 Kbyte asynchronous receive FIFO.
Dedicated asynchronous and isochronous descriptor-based DMA engines.
Eight isochronous transmit contexts.
Eight isochronous receive contexts.
Supports parallel processing of incoming physical read and write requests.
Supports up to 48-bit addressing per OHCI specifica-tion for the physical DMA transfers.


1394b-2002 Link
Cycle master and isochronous resource manager capable.
Supports 1394a-2000 and 1394b-2002 acceleration features.

1394b-2002 PHY
Provides three IEEER 1394b-2002 compliant ports sup-porting 1394b-2002 speeds of 800 Mbits/s and 400Mbits/s while maintaining backward compatibility to IEEE 1394a-2000 speeds of 100 Mbits/s, 200Mbits/s, and 400 Mbits/s over 4.5 m copper.
Fully supports provisions of IEEE 1394a-2000 and 1394-1995 standards for high-performance serial bus.
Link is not required for hub operation.
Supports extended BIAS_HANDSHAKE time for enhanced interoperability with camcorders.
Does not require external filter capacitor for PLL.
Supports arbitrated short bus reset to improve utiliza-tion of the bus.
Supports ack-accelerated arbitration and fly-by concat-enation.
Supports PHY pinging and remote PHY access pack-ets.
Fully supports suspend/resume.
Reports cable power fail interrupt when voltage at CPS ball falls below 7.5 V.

Výrobek je dodáván s manuálem pouze v anglickém nebo německém jazyce.

"

 "FWB-PCI3202B

-3x FW-B 800 externí
-Chip: Texas Instr. TSB83AA23 -33-MHz / 32-Bit
PCI-Power: 3,5" IDE 4pin
- Windows 2000/XP/Vista, MacOS 10.4. nebo vyšší, Linux Kernel 2.6.23 nebo vyšší

Výrobek je dodáván s manuálem pouze v anglickém nebo německém jazyce.

Highlight
* 32-bit PCI Host interface
* Three External Bilingual (1394b) connectors (with screw lock)
* Big IDE 4-pin DC Power Connector for supplying power to the 1394 Bus

Introduction
FWB-PCI3202B is a three port OHCI 1.1 Compliant FireWire 800 (IEEE-1394b) PCI Host Adapter featuring Texas Instruments OHCI 1.1 Compliant FireWire 800 (IEEE-1394b) Single Chip Host Controller.

Technical Specification
Host Bus:
* 33-MHz/32-Bit PCI Interface
* 3.3-V and 5-V PCI Signaling Environments

IEEE 1394 Std Support:
* Fully Supports Provisions of IEEE P1394b Revision 1.33+ at 1-Gigabit Signaling Rates
* Fully Supports Provisions of IEEE 1394a.2000 and 1394.1995 Standard for High Performance Serial Bus
* Fully Interoperable With Firewire., i.LINK., and SB1394., Implementation of IEEE Std 1394

1394 Bus Transfer Rate:
Provides three fully backward-compatible, (IEEE Std 1394a-2000 fully compliant) Bilingual IEEE Std 1394b-2002 cable ports at S100/S200/S400/S400B/S800 megabits per second (Mbits/s).

IEEE-1394 to PCI Controller
Texas Instruments TSB83AA23

DV and DA Enhancement:
* Digital Video and Audio performance enhancements.
* Extended resume signaling for compatibility with legacy DV components.

Power Management :
D0, D1, D2, and D3 power states and PME events per the PCI Bus Power Management Interface Specification

Number of ports:
* FWB-PCI3202B: Three External Bilingual Ports (with screw lock)

Bus Power Connector:
Big IDE 4-pin DC Power Connector

Operating System Requirements
* The 1394b function (host driver) is supported (built in) by the following OS:
o Windows 2000 SP4 or later
o Windows XP SP2 or later
o Windows Vista SP1 or later
o Mac OS 10.4 or later
o Linux kernel 2.6.23 or later.

"